System Configuration
Ezi-SERVOⅡ EtherCAT
| Cable | Max. Length | Remarks |
|---|---|---|
| ① I/O Signal Cable | 20 m | Options (Sold separately) |
| ② EncoderExtension Cable | 20 m | |
| ③ Motor Extension Cable | 20 m | |
| ④ Drive Cable | 2 m | |
| ⑤ EtherCAT Cable | 100 m | |
| Basic Encoder Cable | 0.3 m (Basic length) | Basic cables are attached to motors. |
| Basic Motor Cable | 0.3 m (Basic length) | |
| USB Cable | 5 m | * USB cables are not provided by FASTECH. We recommend using a standard USB cable (USB 2.0 Mini Type B) |
- • Ezi-SERVOⅡ EtherCAT is stepping motor control system using EtherCAT, high speed ethernet (100 mbps Full-Duplex) based fieldbus. Ezi-SERVOⅡ EtherCAT is EtherCAT slave module which supports CAN application layer over EtherCAT (CoE). It employs CiA 402 Drive Profile and supports Profile Position Mode, Homing Mode, Cyclic Synchronous Position Mode.
- • Please refer to Ezi-SERVOⅡ EtherCAT catalog for more detailed information about Ezi-SERVOⅡ EtherCAT drive
Ezi-SERVOⅡ EtherCAT MINI
| Cable | Max. Length | Remarks |
|---|---|---|
| ① I/O Signal Cable | 20 m | Options (Sold separately) |
| ② EncoderExtension Cable | 20 m | |
| ③ Motor Extension Cable | 20 m | |
| ④ Drive Cable | 2 m | |
| ⑤/⑥ EtherCAT Cable | 100 m | |
| Basic Encoder Cable | 0.3 m (Basic length) | Basic cables are attached to motors. |
| Basic Motor Cable | 0.3 m (Basic length) | |
| USB Cable | 5 m | * USB cables are not provided by FASTECH. We recommend using a standard USB cable (USB 2.0 Mini Type B) |
- • Ezi-SERVOⅡ EtherCAT MINI is stepping motor control system using EtherCAT, high speed ethernet (100 mbps Full-Duplex) based field bus. Ezi-SERVOⅡ EtherCAT MINI is EtherCAT slave module which supports CAN application layer over EtherCAT (CoE). It employs CiA 402 Drive Profile and supports Profile Position Mode, Homing Mode, Cyclic Synchronous Position Mode.
- • Please refer to Ezi-SERVOⅡ EtherCAT MINI catalog for more detailed information about Ezi-SERVOⅡ EtherCAT MINI drive.
Ezi-SERVOⅡ EtherCAT 4X
| Cable | Max. Length | Remarks |
|---|---|---|
| ① I/O Signal Cable | 20 m | Options (Sold separately) |
| ② EncoderExtension Cable | 20 m | |
| ③ Motor Extension Cable | 20 m | |
| ④ Drive Cable | 2 m | |
| ⑤ Main Power Cable | 2 m | |
| ⑥ EtherCAT Cable | 100 m | |
| Basic Encoder Cable | 0.3 m (Basic length) | Basic cables are attached to motors. |
| Basic Motor Cable | 0.3 m (Basic length) | |
| USB Cable | 5 m | * USB cables are not provided by FASTECH. We recommend using a standard USB cable (USB 2.0 Mini Type B) |
- • Ezi-SERVOⅡ EtherCAT 4X is stepping motor control system using EtherCAT, high speed ethernet (100 mbps Full-Duplex) based field bus. Ezi-SERVOⅡ EtherCAT 4X is EtherCAT slave module which supports CAN application layer over EtherCAT (CoE). It employs CiA 402 Drive Profile and supports Profile Position Mode, Homing Mode, Cyclic Synchronous Position Mode.
- • Please refer to Ezi-SERVOⅡ EtherCAT 4X catalog for more detailed information about Ezi-SERVOⅡ EtherCAT 4X drive.
Ezi-SERVOⅡ EtherCAT TO
| Cable | Max. Length | Remarks |
|---|---|---|
| ① I/O Signal Cable | 20 m | Options (Sold separately) |
| ② EncoderExtension Cable | 20 m | |
| ③ Motor Extension Cable | 20 m | |
| ④ Main Power Cable | 2 m | |
| ⑤ Drive Cable | 2 m | |
| ⑥ TQOFF Cable | 20 m | |
| ⑦ EtherCAT Cable | 100 m | |
| Basic Encoder Cable | 0.3 m (Basic length) | Basic cables are attached to motors. |
| Basic Motor Cable | 0.3 m (Basic length) | |
| USB Cable | 5 m | * USB cables are not provided by FASTECH. We recommend using a standard USB cable (USB 2.0 Mini Type B) |
- • Ezi-SERVOⅡ EtherCAT TO is stepping motor control system using EtherCAT, high speed ethernet (100 mbps Full-Duplex) based field bus. Ezi-SERVOⅡ EtherCAT TO is EtherCAT slave module which supports CAN application layer over EtherCAT (CoE). It employs CiA 402 Drive Profile and supports Profile Position Mode, Homing Mode, Cyclic Synchronous Position Mode.
- • Please refer to Ezi-SERVOⅡ EtherCAT TO catalog for more detailed information about Ezi-SERVOⅡ EtherCAT TO drive.
Ezi-SERVOⅡ Plus-E
| Cable | Max. Length | Remarks |
|---|---|---|
| ① I/O Signal Cable | 20 m | Options (Sold separately) |
| ② EncoderExtension Cable | 20 m | |
| ③ Motor Extension Cable | 20 m | |
| ④ Drive Cable | 2 m | |
| ⑤ Ethernet Cable | 100 m | |
| Basic Encoder Cable | 0.3 m (Basic length) | Basic cables are attached to motors. |
| Basic Motor Cable | 0.3 m (Basic length) |
- • Ezi-SERVOⅡ Plus-E is a stepping motor control system that can drive up to 254 axis through Ethernet. It has a built-in Ethernet switch, so the system can be built in a daisy chain method. All motions can be controlled by Ethernet communication, and the conditions related to motions are stored in ROM as parameters. In addition, Ezi-SERVOⅡ Plus-E provides a motion library(API) for programming in Windows 7/8/10.
- • Please refer to Ezi-SERVOⅡ Plus-E catalog for more detailed information about Ezi-SERVOⅡ Plus-E drive.
Ezi-SERVOⅡ Plus-E MINI
| Cable | Max. Length | Remarks |
|---|---|---|
| ① I/O Signal Cable | 20 m | Options (Sold separately) |
| ② EncoderExtension Cable | 20 m | |
| ③ Motor Extension Cable | 20 m | |
| ④ Drive Cable | 2 m | |
| ⑤/⑥ Ethernet Cable | 100 m | |
| Basic Encoder Cable | 0.3 m (Basic length) | Basic cables are attached to motors. |
| Basic Motor Cable | 0.3 m (Basic length) |
- • Ezi-SERVOⅡ Plus-E MINI is a stepping motor control system that can drive up to 254 axis through Ethernet. It has a built-in Ethernet switch, so the system can be built in a daisy chain method. All motions can be controlled by Ethernet communication, and the conditions related to motions are stored in ROM as parameters. In addition, Ezi-SERVOⅡ Plus-E MINI provides a motion library(API) for programming in Windows 7/8/10.
- • Please refer to Ezi-SERVOⅡ Plus-E MINI catalog for more detailed information about Ezi-SERVOⅡ Plus-E MINI drive.
Ezi-SERVOⅡ CC-Link IE TSN TO
| Cable | Max. Length | Remarks |
|---|---|---|
| ① I/O Signal Cable | 20 m | Options (Sold separately) |
| ② EncoderExtension Cable | 20 m | |
| ③ Motor Extension Cable | 20 m | |
| ④ Main Power Cable | 2 m | |
| ⑤ Drive Cable | 2 m | |
| ⑥ TQOFF Cable | 100 m | |
| ⑦ CC-Link IE TSN Cable | 0.3 m (Basic length) | |
| Basic Encoder Cable | 0.3 m (Basic length) | Basic cables are attached to motors. |
| Basic Motor Cable | 0.3 m (Basic length) | |
| USB Cable | 5 m | * USB cables are not provided by FASTECH. We recommend using a standard USB cable (USB 2.0 Mini Type B) |
Ezi-SERVOⅡ CC-Link IE TSN 4X
| Cable | Max. Length | Remarks |
|---|---|---|
| ① I/O Signal Cable | 20 m | Options (Sold separately) |
| ② EncoderExtension Cable | 20 m | |
| ③ Motor Extension Cable | 20 m | |
| ④ Drive Cable | 2 m | |
| ⑤ Main Power Cable | 2 m | |
| ⑥ CC-Link IE TSN Cable | 100 m | |
| Basic Encoder Cable | 0.3 m (Basic length) | Basic cables are attached to motors. |
| Basic Motor Cable | 0.3 m (Basic length) | |
| USB Cable | 5 m | * USB cables are not provided by FASTECH. We recommend using a standard USB cable (USB 2.0 Mini Type B) |
Ezi-SERVOⅡ CC-Link
| Cable | Max. Length | Remarks |
|---|---|---|
| ① I/O Signal Cable | 20 m | Options (Sold separately) |
| ② EncoderExtension Cable | 20 m | |
| ③ Motor Extension Cable | 20 m | |
| ④ Drive Cable | 2 m | |
| ⑤ RS-485 Cable | 2 m | |
| ⑥ CC-Link Cable | 100 m | |
| Basic Encoder Cable | 0.3 m (Basic length) | Basic cables are attached to motors. |
| Basic Motor Cable | 0.3 m (Basic length) |
- • Ezi-SERVOⅡ CC-Link is a remote device module that supports high speed Fieldbus(Max. 10Mbps) network. It occupies 1 to 3 station in CC-Link, enabling multi-function control, and processes motion and monitoring functions with device commands.
- • Please refer to Ezi-SERVOⅡ CC-Link catalog for more detailed information about Ezi-SERVOⅡ CC-Link drive.
Ezi-SERVO ST
| Cable | Max. Length | Remarks |
|---|---|---|
| ① I/O Signal Cable | 20 m | Options (Sold separately) |
| ② EncoderExtension Cable | 20 m | |
| ③ Motor Extension Cable | 20 m | |
| ④ Drive Cable | 2 m | |
| Basic Encoder Cable | 0.3 m (Basic length) | Basic cables are attached to motors. |
| Basic Motor Cable | 0.3 m (Basic length) |
- • Ezi-SERVO ST is a pulse train input type drive.
- • or more details on the Ezi-SERVO ST Drive, please refer to the Ezi-SERVO ST catalog.