FASTECH
Specifications of Controller
Ezi-MOTIONLINK Plus-R
Input Voltage 24VDC ±10%
Data Range -134,217,728 ~ +134,217,727 [pulse] (28bit)
Type of Acc/Dec Symmetric / Asymmetric trapezoidal acceleration & deceleration
Command pulse output method 2 pulse mode (CW/CCW) or 1 pulse mode (Pulse/Dir)
(Selected by parameter)
Max. Output Freguency 5MHz
Encoder Max. Input Freguency 4MHz
Input Signal 3 dedicated inputs (LIMIT+, LIMIT-, ORIGIN), 5 programmable inputs (photocoupler)
Output Signal 1 dedicated output (Compare Out), 3 programmable outputs(photocoupler), Brake
Rotational Direction CW/CCW (Selected by parameter)
LED Display Power status, Alarm status, In-Position status, Servo On/Of status, ±Limit Sensor status, Origin Sensor status
Communication Interface The RS-485 serial communication, Communication speed: 9,600~921,600 [bps]
Multi Axes Drive Maximum 16 axes through Daisy-Chain
Multi Axes Drive Origin Sensor, Z phase, ±Limit sensor
GUI User Interface Program within Windows
Library Motion Library (DLL) for windows 7/8/10
Operating Condition Ambient Temperature · In Use: 0~55˚C
· In Storage: -20~70˚C
Humidity · In Use: 35~85% RH (Non-condensin)
· In Storage: 10~90% RH (Non-condensin)
Vib. Resist. 0.5g
Dimensions of Controller[mm]
Ezi-MOTIONLINK Plus-R
System Configuration
Ezi-MOTIONLINK Plus-R
External Wiring Diagram
Ezi-MOTIONLINK Plus-R
※ When connects I/O cable between controller and drive, please turn off the power of both controller and drive, in order to protect the drive from any damage.