Specifications of Drive
Ezi-STEPⅡ Plus-E MINI
| Motor Model | BM-20 series | BM-28 series | BM-42 series | BM-56 series | BM-60 series | |
|---|---|---|---|---|---|---|
| Driver Model | EzT2-PE-20 series | EzT2-PE-28 series | EzT2-PE-42 series | EzT2-PE-56 series | EzT2-PE-60 series | |
| Input Voltage | 24VDC ±10% | |||||
| Control Method | Bipolar PWM drive with 32bit MCU | |||||
| Multi Axes Drive | Maximum 254 axis operating (Selectable IP: 1~254) | |||||
| Position Table | 256 motion command steps (Speed, External start, Jump, Loop, Wait and PT finish etc.) | |||||
| Current Consumption | Max 500mA (Except motor current) | |||||
| Communication Interface | Ethernet communication, Dual port Ethernet switch embeded, Communication speed: 10/100 Base - T/TX Full-Duplex | |||||
| Position Control | · Incremental mode / Absolute mode Data Range: -2,147,483,648~+2,147,483,647 [pulse] · Operating speed: Max. 3,000 [rpm] |
|||||
| Return to Origin | Origin Sensor, ±Limit sensor, Z phase (By external encoder) | |||||
| GUI | User Interface Program within Windows | |||||
| Library | Motion Library (DLL) for windows 7/8/10 | |||||
| Operating Condition |
Ambient Temperature |
· In Use: 0~50˚C*1 · In Storage: -20~70˚C |
||||
| Humidity | · In Use: 35~85% RH (Non-Condensing) · In Storage: 10~90% RH (Non-Condensing) |
|||||
| Vib. Resist. | 0.5g | |||||
| Function | Rotation Speed | 0~3,000 [rpm] | ||||
| Resolution [ppr] | 500 1,000 1,600 2,000 3,200 3,600 4,000 5,000 6,400 8,000 10,000 20,000 25,000 36,000 40,000 50,000(Selectable with Parameter) * Default: 10,000 | |||||
| Protection Functions | Over Current Error, Over Speed Error, Over Temperature Error, Over Regenerated Voltage Error, Motor Connect Error, ROM Error | |||||
| LED Display | Power Status, RUN Status, STEP ON Status, Alarm Status | |||||
| Rotational Direction | CW/CCW (Selectable by parameter) | |||||
| I/O Signal | Input Signals | 3 dedicated inputs (LIMIT+, LIMIT-, ORIGIN), 3 programmable inputs (Photocoupler) | ||||
| Output Signals | 1 dedicated output (Compare Out), 1 programmable outputs (Photocoupler), Brake | |||||
*1 : EzT2-PE-MI-56, 60 Series are needed to be mounted on an external heat sink or a structure capable of dissipating heat.
System Configuration
Ezi-STEPⅡ Plus-E MINI
External Wiring Diagram
Ezi-STEPⅡ Plus-E MINI
[CAUTION] Please refer to the Manual when connects motor extension cable. Careful connection will be required to protect the drive from any damages.
※ When connects I/O cable between controller and drive, please turn off the power of both controller and drive, in order to protect the drive from any damage.