Ezi-IO-EC-■16□-E / Ezi-IO-EC-I8O8□-E Series
Settings and Operation
Status LED
- 1. Status LED
-
Indication Color Function ON/OFF Condition PWR Red Power input indication Turn on when power is applied RUN Green EtherCAT communication status indication Turn on when EtherCAT Communication status is active ECAT IN Green EtherCAT Link/Activity LED indication Flashing when EtherCAT IN link active ECAT OUT Green EtherCAT Link/Activity LED indication Flashing when EtherCAT OUT link active 0~15
0~7/0~7Green I/O status indication Input Module : Turn on when input signal is ON
Output Module : Turn on when output signal is ON
Connector
- 1. Power Connector(CN1)
-
NO. Function I/O 1 24VDC Input 2 GND Input 
- ＊Be sure to supply power which is suitable ofr the load of I/O and contorl.
- 2. I/O Connector(CN2)
-
NO. Function I/O 1 24VDC Output 2 NC ---- 3 GND Output 4 SIGNAL I/O 
- 3. EtherCAT Communication Connector(CN3, CN4)
-
NO. Function 1 TD+ 2 TD- 3 RD+ 4 ---- 5 ---- -
NO. Function 6 RD- 7 ---- 8 ---- Connector
hoodF.GND 
Connector Specifications
- Connector specifications for cabling to module.
-
Purpose Item Part Number Manufacturer Power (CN1) Terminal Block MC421-38102 DECA I/O (CN2) e-CON Plug Connector CNE-P04-YW Autonics - ※ Above connector is the most suitable product for the module applied. Another equivalent connector can be used.
Ezi-IO-EC-■16□-T / Ezi-IO-EC-I8O8□-T Series
Settings and Operation
Status LED
- 1. Status LED
-
Indication Color Function ON/OFF Condition PWR Red Power input indication Turn on when power is applied RUN Green EtherCAT communication status indication Turn on when EtherCAT Communication status is active ECAT IN Green EtherCAT Link/Activity LED indication Flashing when EtherCAT IN link active ECAT OUT Green EtherCAT Link/Activity LED indication Flashing when EtherCAT OUT link active 0~15
0~7/0~7Green I/O status indication Input Module : Turn on when input signal is ON
Output Module : Turn on when output signal is ON
Connector
- 1. Power Connector(CN1)
-
NO. Function I/O 1 24VDC Input 2 GND Input - ＊Be sure to supply power which is suitable ofr the load of I/O and contorl.
- 2. I/O Connector(CN2)
-
NO. Function I/O 1 24VDC Output 2 24VDC Output 3 SIGNAL I/O 4 SIGNAL I/O 5 SIGNAL I/O 6 SIGNAL I/O 7 SIGNAL I/O 8 SIGNAL I/O 9 SIGNAL I/O 10 SIGNAL I/O 11 GND Output 12 GND Output -
NO. Function I/O 1 24VDC Output 2 24VDC Output 3 SIGNAL I/O 4 SIGNAL I/O 5 SIGNAL I/O 6 SIGNAL I/O 7 SIGNAL I/O 8 SIGNAL I/O 9 SIGNAL I/O 10 SIGNAL I/O 11 GND Output 12 GND Output 
- 3. EtherCAT Communication Connector(CN3, CN4)
-
NO. Function 1 TD+ 2 TD- 3 RD+ 4 ---- 5 ---- -
NO. Function 6 RD- 7 ---- 8 ---- Connector
hoodF.GND
Connector Specifications
- Connector specifications for cabling to module.
-
Purpose Item Part Number Manufacturer Power (CN1) Terminal Block MC421-38102 DECA - ※ Above connector is the most suitable product for the module applied. Another equivalent connector can be used.
Ezi-IO-EC-■32□-E / Ezi-IO-EC-I16O16□-E Series
Settings and Operation
Status LED
- 1. Status LED
-
Indication Color Function ON/OFF Condition PWR Red Control power input indication Turn on when control power is applied RUN Green EtherCAT communication status indication Turn on when EtherCAT Communication status is active ECAT IN Green EtherCAT Link/Activity LED indication Flashing when EtherCAT IN link active ECAT OUT Green EtherCAT Link/Activity LED indication Flashing when EtherCAT OUT link active 0~31
0~15/0~15Green I/O status indication Input Module : Turn on when input signal is ON
Output Module : Turn on when output signal is ON
Connector
- 1. Control Power Connector(CN1)
-
NO. Function I/O 1 24VDC Input 2 GND Input
- 2. I/O Connector(CN2)
-
NO. Function I/O 1 EXT_24VDC Output 2 NC ---- 3 EXT_GND Output 4 SIGNAL I/O
- 3. EtherCAT Communication Connector(CN3, CN4)
-
NO. Function 1 TD+ 2 TD- 3 RD+ 4 ---- 5 ---- -
NO. Function 6 RD- 7 ---- 8 ---- Connector
hoodF.GND
- 4. I/O Power Connector(CN5)
-
NO. Function I/O 1 EXT_24VDC Input 2 EXT_24VDC Input 3 EXT_GND Input 4 EXT_GND Input 
- ＊Be sure to supply a power soucre which is suitable ofr the load of I/O.
Connector Specifications
- Connector specifications for cabling to module.
-
Purpose Item Part Number Manufacturer Control Power (CN1) Terminal Block MC421-38102 DECA I/O Power (CN5) Terminal Block MC421-38104 DECA I/O (CN2) e-CON Plug Connector CNE-P04-YW Autonics - ※ Above connector is the most suitable product for the module applied. Another equivalent connector can be used.
Ezi-IO-EC-■32□-T / Ezi-IO-EC-I16O16□-T Series
Settings and Operation
Status LED
- 1. Status LED
-
Indication Color Function ON/OFF Condition PWR Red Control power input indication Turn on when control power is applied RUN Green EtherCAT communication status indication Turn on when EtherCAT Communication status is active ECAT IN Green EtherCAT Link/Activity LED indication Flashing when EtherCAT IN link active ECAT OUT Green EtherCAT Link/Activity LED indication Flashing when EtherCAT OUT link active 0~31
0~15/0~15Green I/O status indication Input Module : Turn on when input signal is ON
Output Module : Turn on when output signal is ON
Connector
- 1. Control Power Connector(CN1)
-
NO. Function I/O 1 24VDC Input 2 GND Input
- 2. I/O Connector(CN2)
-
NO. Function I/O 1 EXT_24VDC Output 2 EXT_24VDC Output 3 SIGNAL I/O 4 SIGNAL I/O 5 SIGNAL I/O 6 SIGNAL I/O 7 SIGNAL I/O 8 SIGNAL I/O 9 SIGNAL I/O 10 SIGNAL I/O 11 EXT_GND Output 12 EXT_GND Output -
NO. Function I/O 1 EXT_24VDC Output 2 EXT_24VDC Output 3 SIGNAL I/O 4 SIGNAL I/O 5 SIGNAL I/O 6 SIGNAL I/O 7 SIGNAL I/O 8 SIGNAL I/O 9 SIGNAL I/O 10 SIGNAL I/O 11 EXT_GND Output 12 EXT_GND Output 
- 3. EtherCAT Communication Connector(CN3, CN4)
-
NO. Function 1 TD+ 2 TD- 3 RD+ 4 ---- 5 ---- -
NO. Function 6 RD- 7 ---- 8 ---- Connector
hoodF.GND
- 4. I/O Power Connector(CN5)
-
NO. Function I/O 1 EXT_24VDC Input 2 EXT_24VDC Input 3 EXT_GND Input 4 EXT_GND Input - ＊Be sure to supply a power soucre which is suitable ofr the load of I/O.
Connector Specifications
- Connector specifications for cabling to module.
-
Purpose Item Part Number Manufacturer Control Power (CN1) Terminal Block MC421-38102 DECA I/O Power (CN5) Terminal Block MC421-38104 DECA - ※ Above connector is the most suitable product for the module applied. Another equivalent connector can be used.