Specifications of Module
Ezi-IO PROFINET DIO
| Model | Ezi-IO-PN-I32□-■ | Ezi-IO-PN-O32□-■ | Ezi-IO-PN-I16O16□-■ | ||
|---|---|---|---|---|---|
| Input Voltage | DC24V ±10% | ||||
| Current Consumption | · Control Power: Max. 140mA · I/O Power: Max. 125mA (Excluding Load Current) |
· Control Power: Max. 170mA · I/O Power: Max. 75mA (Excluding Load Current) |
· Control Power: Max. 160mA · I/O Power: Max. 100mA (Excluding Load Current) |
||
| Operating Condition | Ambient Temperature | · In Use: 0~50˚C · In Storage: -20~70˚C |
|||
| Humidity | · In Use: 35~85% RH (Non-Condensing) · In Storage: 10~90% RH (Non-Condensing) |
||||
| Vib. Resist. | 0.5g | ||||
| Function | Input | Number of Input Channels | 32CH | - | 16CH |
| Rated Input Voltage | DC24V | DC24V | |||
| Rated Input Current | 5mA/CH | 5mA/CH | |||
| Isolation Method | Photocoupler Isolation | Photocoupler Isolation | |||
| Common Method | 16CH/COM | 16CH/COM | |||
| Off→On Response Time | 10μs or lower | 10μs or lower | |||
| On→Off Response Time | 70μs or lower | 70μs or lower | |||
| Output | Number of Output Channels | - | 32CH | 16CH | |
| Rated Input Voltage | DC24V | DC24V | |||
| Rated Input Current | 0.2A/points | 0.2A/points | |||
| Isolation Method | Photocoupler Isolation | Photocoupler Isolation | |||
| Common Method | 16CH/COM | 16CH/COM | |||
| Off→On Response Time | 4μs or lower | 4μs or lower | |||
| On→Off Response Time | 190μs or lower | 190μs or lower | |||
| LED Display | Input 0 ~ 31 Status | Output 0 ~ 31 Status | Input 0 ~ 15 / Output 0 ~ 15 Status | ||
| · PWR: Power Status · RUN: Communication Status · ERROR: Operation Error |
· MAINT: Maintenance Required Status · LINK1 / LINK2: Port1 / Port2 Link Status · ACT1 / ACT2: Port1 / Port2 Activity Status |
||||
| PROFINET | Supported Protocols | RT(Realtime), IRT(Isochronous Realtime) | |||
| Bus Interface | 2×RJ45 Connector | ||||
| Cable | STP (Shielded Twisted Pair) Cable, Category 5e or higher / Max. 100m | ||||
Dimensions of Module
32 points e-CON Connector Type
- - Model : Ezi-IO-PN-I32□-E, Ezi-IO-PN-O32□-E, Ezi-IO-PN-I16O16□-E
32 points Terminal Block Type
- - Model : Ezi-IO-PN-I32□-T, Ezi-IO-PN-O32□-T, Ezi-IO-PN-I16O16□-T
* □: NPN / PNP Type
* Install the product on a din rail with a width of 35 mm.
* Install the product on a din rail with a width of 35 mm.
System Configuration
[ 32 points e-CON Connector Type ]
[ 32 points Terminal Block Type ]
External Wiring Diagram
[ 32 points e-CON Connector Type ]
- 1. Ezi-IO-PN-I32N-E (NPN)
- 2. Ezi-IO-PN-I32P-E (PNP)
- 3. Ezi-IO-PN-O32N-E (NPN)
- 4. Ezi-IO-PN-O32P-E (PNP)
- 5. Ezi-IO-PN-I16O16N-E (NPN)
- 6. Ezi-IO-PN-I16O16P-E (PNP)
※ VCC and E.G. are supplied through the input/output power connection connector (CN5).
※ Examples) · 2Pin Input Sensor: Limit switch, etc. · 3Pin Input Sensor: Position sensor, photo sensor, proximity sensor, etc. · 2Pin Output Device: Brake, solenoid, photocoupler, etc.
※ Examples) · 2Pin Input Sensor: Limit switch, etc. · 3Pin Input Sensor: Position sensor, photo sensor, proximity sensor, etc. · 2Pin Output Device: Brake, solenoid, photocoupler, etc.
[ 32 points Terminal Block Type ]
- 1. Ezi-IO-PN-I32N-T (NPN)
- 2. Ezi-IO-PN-I32P-T (PNP)
- 3. Ezi-IO-PN-O32N-T (NPN)
- 4. Ezi-IO-PN-O32P-T (PNP)
- 5. Ezi-IO-PN-I16O16N-T (NPN)
- 6. Ezi-IO-PN-I16O16P-T (PNP)
※ VCC and E.G. are supplied through the input/output power connection connector (CN5).
※ Examples) · 2Pin Input Sensor: Limit switch, etc. · 3Pin Input Sensor: Position sensor, photo sensor, proximity sensor, etc. · 2Pin Output Device: Brake, solenoid, photocoupler, etc.
※ Examples) · 2Pin Input Sensor: Limit switch, etc. · 3Pin Input Sensor: Position sensor, photo sensor, proximity sensor, etc. · 2Pin Output Device: Brake, solenoid, photocoupler, etc.